Not Suitable for phantom-powered microphones (condensers, active ribbon mics). ![]() Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards. Its output impedance is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum. sE Electronics DM1 Dynamite Plug the DM1 directly into your passive microphone Plug the XLR microphone cable into the DM1 Engage the +48V phantom power. Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. SE Electronics DM1 SE Electronics DM1 60 Active Inline Preamp Gain: +28 dB Ideal for tapes - or dynamic microphones with low output Class A FET transistors Low self-noise Enables long cable runs and reduces susceptibility to RF interference Gold-plated XLR contacts Robust all-metal housing Note: requires 48V phantom power. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Buy inline preamps like this and others like it, online from Singapore The sE Electronics DM1 Dynamite is an active inline preamp designed to provide +28 dB. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain. Some mics need a LOT of gain - and not all preamps are up to the challenge. sE Electronics, Active Inline Preamp, sE Electronics DM1 DYNAMITE, The DM1 DYNAMITE: explosive level for all your passive mics. ![]() ![]() Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE: explosive level for all your passive mics.
0 Comments
Leave a Reply. |